Poster: A snowHead
|
Hi all,
I was just wondering if anyone had tried the above combination and if so how they found it? Theoretically they should be compatible, but I've read that alot of people are having to grind the soles of their Maestrales to get them to fit, which is something I'd rather not have to do to my MTN Labs!
The alternative would be to get some Salomon Wardens, but I don't really trust the Salomon heel peice having used it on a pair of Guardians...
Cheers!
|
|
|
|
|
Obviously A snowHead isn't a real person
Obviously A snowHead isn't a real person
|
@Beveled Edge, Welcome to SnowHeads.
I have the Marker Lord SP, and used them with my Tecnica Cochise Pro Light. I don't have that boot anymore, but I remember it was at the limit of the height adjustment, and it had a fairly gentle rocker. I think when I measured it, the Tech toe was 8mm taller that the Alpine DIN toe.
You really need to try and sit a pair of MTN Labs and Maestrales next to each other for comparison. I know that many people squeeze all sorts of touring/tech toed boots into frame bindings.
|
|
|
|
|
Well, the person's real but it's just a made up name, see?
Well, the person's real but it's just a made up name, see?
|
Cheers PowderAdict, I've been reading for a while but never had cause to post, seems like a good community.
Yeah that'd be really useful, sadly there aren't many shops that I can easily get too Good to have another point of reference though, thanks!
|
|
|
|
|
You need to Login to know who's really who.
You need to Login to know who's really who.
|
@Beveled Edge, FWIW I'm using the Wardens with Cochise Pro Lights and couldn't be happier. Ski way better than my (admittedly battered) Marker Barons, and have been totally bomber so far!
|
|
|
|
|
Anyway, snowHeads is much more fun if you do.
Anyway, snowHeads is much more fun if you do.
|
Surley the specs of both are published somewhere?
|
|
|
|
|
You'll need to Register first of course.
You'll need to Register first of course.
|
Some fully rockered AT boots do need a very slight 'fettle' to fit in the Lord toe and achieve the correct toe height adjustment. I've fitted Mercury's & Maestrale's to them & they require about half a mm taking off in a strip about 6/8mm wide across the width of the sole where that area sits on the AFD. I've not tried the MTN boot in the Lord so couldn't say whether it needs adjusting.
It's no big deal to do and with a username like Beveled Edge it should be easy for you to do
|
|
|
|
|
|